Conductivity Transmitter (ETC)
Short description
This device consists of four electrode rods and a terminal box (board holding box) and is used to continuously display the conductivity of the fluid (fluid impurity) in steam boilers, tanks, and pressurized hot water installations.
Additional information
If the impurity level is lower or higher than the acceptable level, the fluid impurity level can be controlled according to the 4-20 mA output and the relay output provided by this device. The measurement range, fluid temperature, and fluid conductivity in microsiemens can also be viewed on the display built into the board of this device.
Tolerable pressure and temperature: 32bar-238 °c
Product feature
The feature table is located here.
Consulting and equipping the Arak Igniting Factory
Our consultants are ready to guide you in choosing the right equipment, professional purchasing...